Flashing Firmware Samsung Galaxy S20+ SM-G986U1
Flashing Firmware Samsung Galaxy S20+ SM-G986U1 - Basically, flash firmware is the process of installing or reinstalling ROMs into Samsung smartphones. Be it previous versions of Android such as Lollipop (5.0.1), Marshmallow (6.0.1), Nougat (7.0), Oreo (8.0), Pie (9.0) to the latest Android Q (10.0). Read Also : Download Firmware Samsung Galaxy S20+ SM-G9860
Flashing Samsung firmware can generally be done using odin application, which is a flashtool application specifically for Samsung smartphones. In addition to firmware, Odin is also often used as a tool to root, flash TWRP files, flash gCam, and various other types of files supported by it.
 |
| Samsung Galaxy S20+ SM-G986U1 |
To flash this firmware itself is not really a difficult thing to do. However, an understanding and thoroughness is required before or when doing so. Why so, because this process is very vulnerable to failures that can cause Samsung devices can not start up to homescreen, or better known as bootloop.
Aside from the above factors, sometimes the cause of the failure to install the firmware is due to a mistake in selecting the Stock ROM (not according to the phone series). Therefore, be careful in choosing. Look for ROMs that really fit the series/models of your phone.
Before moving on to the subject matter, maybe some of you want to know what are the benefits of Samsung flash firmware?
Flash firmware, in addition to being able to be used to upgrade / downgrade the operating system, can also be used as to solve software problems.
How to Flash Samsung Firmware via Odin
Before flashing, the most important point to do is to do BACKUP, BACKUP and BACKUP ROM. Because if there is an error during the flashing process, then we can restore (restore) to the previous position. Read Also : Unduh Firmware Samsung Galaxy S20+ SM-G986B
1. Samsung Flash Firmware Tools and Materials
Computer (PC / Laptop)
A USB Cable (original recommended).
Download Odin3 v3.xx.x Application (select latest version) then extract the file using winrar / 7-zip.
Download Samsung USB Driver then Install it into the computer (restart if the computer asks).
Stock ROM / Firmware Samsung. For the download link, please visit one of the following sites:
SAMFREW.COM.
UPDATO.COM
SAMMOBILE.COM
Extract the downloaded firmware file using a 7-zip or winrar application.
2. Samsung Flash Firmware Process
#1. Turn the phone off completely, then go into downloading mode. In this case there are two ways that can be done, for mobile phones that have a "HOME" button, please press and hold the "POWER + HOME + VOLUME DOWN" button.
#2. For Samsung HP output 2018 or not using the "HOME" button, please press and hold the "POWER + VOLUME UP + VOLUME DOWN" button.
#3. Press all three buttons at the same time for approximately 3 to 5 seconds. When you have entered the "WARNING" view, release all three, then press the "Volume Up" button to enter the main menu downloading mode
#4. If you are already in the downloading menu, then connect your phone to your computer using a USB cable. Extract ODIN from the zip file and then run it by right-clicking, select run as administrator.
#5. Before continuing, make sure the computer with the phone is well connected. To find out, under the tab "LOG" Odin will appear the message "Added!!" or appear USB port ID under "ID:COM" (see the image in step #5 and #6 for more details).
#6. If it doesn't exist, try changing the usb cable or moving the usb cable to another usb port. Next click the 'OPTIONS' tab and then check (✓) in the "AUTO REBOOT" and "F. RESET TIME" columns.
#7. Next, select the downloaded firmware file. In this case there are two ways that can be used (depending on how many firmware files have been extracted). For Firmware that has 1 (one) file only, please click the "AP" button and find the place where the firmware file is stored (make sure the file extension is tar.md5).
For Firmware / Stock ROM with the number of files 4 or 5 pieces (CSC, BL, AP, CP, HOME), please enter one by one the files as the name suggests.
#7. Next step, please click the "START" button to start the flasing process and wait for it to finish. It usually takes about 3-10 minutes.
#8. After the installation process is complete and successful, there will be a "PASS!" message on the top left of the odin. At this stage, you can unplug the usb cable and close the odin application.
#9. Back to the phone. Automatically the phone will restart / reboot. Again wait a while until the phone enters the android's initial settings menu. Congratulations, the installation of a new rom is complete, Please arrange it to your liking. Read Also : Firmware Unduh Samsung Galaxy S20 Ultra SM-G988U
